Grizzly Impact Driver H0583 User Manual

MODEL H0583  
1" HEAVY–DUTY  
TWO–HAMMER  
IMPACT WRENCH  
INSTRUCTION SHEET  
Throttle  
EYE/EAR INJURY HAzARD!  
Wear safety glasses and  
hearing protection when  
using this tool!  
INJURY HAzARD!  
Always disconnect tool from  
air to prevent unexpected  
operation during service!  
Side Handle  
Forward/Reverse  
Switch  
DO NOT EXCEED 115 PSI!  
Personal injury could  
occur.  
Figure 1. Model H0583  
SHATTERINg HAzARD!  
Use sockets rated for  
impact wrench use only.  
Operation  
Install any 1" drive socket into your air impact  
wrench. Flip the forward/reverse switch, shown in  
Figure 1, to change direction. Connect to air line  
regulated at 90 PSI. using both hands, securely  
hold onto the impact wrench and squeeze the  
throttle.  
Specifications  
Drive Size..........................................................1"  
Bolt Size Capacity .......................................... 134  
"
No-Load Speed .................................. 3,000 RPM  
Maximum Torque ................................. 1,400 ft/lb  
Air Inlet Size .............................................12" NPT  
Air Consumption...................................... 14 CFM  
Operating Pressure ................................... 90 PSI  
Maximum Operating Pressure................. 115 PSI  
Weight ......................................................28.6 lbs  
Maintanence  
The impact wrench MuST be regularly lubricated  
with 3-4 drops of air tool oil directly into the air fit-  
ting before each use. For best results, we recom-  
mend using an in line filter, lubricator, and regula-  
tor, as shown in Figure 2.  
Inventory  
A. Impact Wrench ........................................... 1  
B. Side Handle................................................ 1  
C. Cap Screws................................................ 4  
Quick  
Connector  
Quick  
Connector  
Lubricator  
Regulator  
Your  
Tool  
Air  
Compressor  
Quick  
Coupler  
Setup  
Quick  
Coupler  
Secure the side handle to the impact wrench with  
the cap screws.  
Air Hose  
Filter  
If you need help with your new pneumatic tool,  
call our Tech Support at: (570) 546-9663.  
Figure 2. Installing your tool.  
COPyRIgHT © MAy, 2008 By gRIzzLy INDuSTRIAL, INC.  
WARNINg: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE  
OR FORM WITHOUT THE WRITTEN APPROVAL OF gRIzzLY INDUSTRIAL, INC.  
#JM10694 PRINTeD IN TAIWAN  
 

Graco Septic System 239877 Series D User Manual
Haier Refrigerator A2FE635CBJ User Manual
HannsG Computer Monitor HW173AB User Manual
Harbor Freight Tools Air Compressor 42321 User Manual
Healthrider Home Gym HREX04981 User Manual
Heath Zenith Work Light 595 5578 09 User Manual
Hotpoint Dishwasher FDEL 3101 Experience User Manual
HP Hewlett Packard Network Card HP 98624A User Manual
HP Hewlett Packard Switch 5120 48G User Manual
IBM Computer Accessories 25CPC710 User Manual