MODEL G9947
MINI SHEET METAL CUTTER
INSTRUCTION SHEET
CUTTING & PINCHING HAZARD! Keep fin-
gers at a safe distance from wheels, or fin-
gers could be cut or severely pinched.
Introduction
Pawl
The Model G9947 rotary shear will make quick
work of cutting sheet metal to 16 gauge. Features
an 11" handle. Weighs 4 lbs.
Ratchet
Figure 2. Ratchet and pawl.
Inventory
A. Mini Sheet Metal Cutter.............................. 1
Setup & Operation
1. Securely mount the mini sheet metal cutter to
your workbench.
2. Raise the handle and engage the pawl in one
of the ratchet notches.
3. Place the sheet metal between the upper
drive wheel and lower wheel (see Figure 2).
4. Pull the handle down with one hand as you
feed the sheet metal with the other into the
cutting wheel to begin shearing.
Figure 1. Model G9947
If you need help with your new tool, call our Tech
Support at: (570) 546-9663.
EYE INJURY HAZARD!
Wear safety glasses during
use of this tool!
COPYRIGHT © JUNE, 2006 BY GRIZZLY INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#PC8328 PRINTED IN CHINA
|